Comments on: TRAVELODGE HOTEL MADE FROM SHIPPING CONTAINERS

By: agson

agson — Thu, 07 May 2009 13:45:24 +0000

Heart about this project last year, and visited. The interior is quite simple, anyway, it is a budget hotel chain. They spent 55,000USD for 2 rooms with simple decoration including wall, floor, ceiling, cables. Plus the furture, MK electrical stuff, and TV…. the cost of making 2 rooms will be higher than 70,000USD, which a bit more expensive than the product of Agson Engineers modular container hotel unit.

Agson Engineers are making higher level modular prefab container hotel for London as well.

You can visit http://www.agson.com.cn to get detail informaion. or you could use a design toy on http://www.agson.co.uk/fp/start.php

By: mashpotatomac

mashpotatomac — Sun, 22 Feb 2009 07:47:30 +0000

“So, is that just wasted space in those angled corners? or are they cutting the containers apart for the areas adjacent to the corners?

Seems to me that designing a building with non-90 degree angles when you’re using prefab modules that are rectangular in shape is counter-intuitive”

Let’s not forget about the need for vertical chases to run Domestic Water, Fire, Hydronic, Electrical, Low Voltage and any other Utility needed to serve all of the units.

By: wk.werk

wk.werk — Tue, 26 Aug 2008 12:22:44 +0000

Must say, what a disappointment. The building would have looked a damn site better if they had left the containers exposed… actually anything would look better than the average modern british office block cladding.

By: Odziz

Odziz — Mon, 25 Aug 2008 16:46:45 +0000

selophane writes: This is great, I’d love to see more repetitive modular buildings built out of shipping containers.. I wonder how this would work with Fire Codes in the USA.

You think we don\\\’t have these in the UK. Working with tht Planning Authorities and Health and Safety Executive can be like try to work with the Gestapo and the Waffen SS.

By: kielts

kielts — Sun, 24 Aug 2008 22:33:11 +0000

What is unfortunate in the design is that beautiful composition of the blue shipping container and red steel is masked by a disappointing brick and cement plaster veneer. Kudos for using shipping containers and saving so much material versus conventional building. However, the design really missed the mark.

By: Phyre7

Phyre7 — Sun, 24 Aug 2008 20:20:22 +0000

Here in the land of shake, rattle, and ash fallout each room would be it’s own quake resistant shelter. Too bad most US building codes are some of the most acrhaic on the planet, intended to protect 19th century business practices.

By: gerry

gerry — Sun, 24 Aug 2008 17:07:08 +0000

Corners are likely used for stair ways as well. Great project!

By: mr_spoon_nz

mr_spoon_nz — Sun, 24 Aug 2008 02:54:47 +0000

This is great, I have an assignment due soon on an Alternitive Design and I have choosen shipping containers as my topic. Here in New Zealand we have a hugh amont of containers sitting in ports allover our country, and some have been sitting there for 10years without ever being moved. So to see that these have now got another use it great, not to mention the fact that they are cheap.

Regards
Daniel
Q/S C/M student.

By: grs

grs — Sat, 23 Aug 2008 14:49:18 +0000

Corners are also likely used for elevator shafts as well. I\’d be curious to take a look at the inside of a finished unit and how they worked in the w/c and shower areas.
Kitchen Plans

By: earthsmile

earthsmile — Sat, 23 Aug 2008 07:22:59 +0000

This is a big step forward towards truly affordable personal dwelling units. These big projects pay for the research that develops the systems, connectors and designs that will translate into very cost effective Housing units. Bravo !

By: selophane

selophane — Sat, 23 Aug 2008 01:22:20 +0000

This is great, I’d love to see more repetitive modular buildings built out of shipping containers.. I wonder how this would work with Fire Codes in the USA.

By: WBrooke

WBrooke — Fri, 22 Aug 2008 15:36:03 +0000

Since the modules fit closely together top-to-bottom, they are likely using the “wasted” corner spaces to run electrical, plumbing, fire protection, and ventilation services.

By: mattress

mattress — Fri, 22 Aug 2008 14:47:27 +0000

So, is that just wasted space in those angled corners? or are they cutting the containers apart for the areas adjacent to the corners?

Seems to me that designing a building with non-90 degree angles when you’re using prefab modules that are rectangular in shape is counter-intuitive.