The EcoDrain Cuts Water Heater Use by 40%

A hot shower is relaxing, but is also a huge waste of energy: we heat our water with massive amounts of natural gas, oil or electricity, then transport the heated water to our tubs for a few seconds of sudsing, before washing it down the drain full of raw, wasted heat and energy! What if we could recapture this untapped source of wasted energy by transferring the heat from that shower waste-water to cold incoming water? The EcoDrain, a simple heat exchange unit, does just that, saving water heater use by up to 40%.

ecodrain, sustainable design, green design, green hot water heater, energy reduction, water heat exchanger, interior, product, energy efficient, green building, water fixture

Showering is “likely your most energy-intensive daily household activity. Although hidden on your energy bill, heating water for showers represents a significant portion of the total.” The EcoDrain is a simple heat exchange unit with no moving parts that is “easy to install” and needs no maintenance.

We were lucky enough to see a preview of this new technology at last year’s West Coast Green where Marc Hoffman, EcoDrain chief product designer, presented the concept to a panel of VCs and Green Industry experts. The devices simple, stainless steel profile belies it’s considerable innovation. The heat exchange unit features a “double wall of separation between fresh and waste water…plus an interior non-stick coating to prevent soap, hair or debris collecting inside.”

“Hot waste fluids represent a massive and often untapped source of clean energy,” say the EcoDrain folks, and we couldn’t agree more. But building code hurdles seem to be slowing the pace of getting the EcoDrain out to the public. As of this writing, EcoDrain says, “We are committed to getting the EcoDrain approved in your area. Please contact us if you require code approval in your area.” They go on to say that “The EcoDrain is a new product. It saves energy in homes and so is very relevant for the LEED for homes program. We are working to see how the EcoDrain will fit into this program. Please contact us for more information.” As for us, we wish them the best of luck and hope to see these installed everywhere in the near future.

+ EcoDrain

8 Responses to “The EcoDrain Cuts Water Heater Use by 40%”

crackgerbal Says:

March 24th, 2009 at 4:32 pm

I saw this on another blog about six months ago and really liked the idea of using the waste heat from showers. Im glad they coated the inside of the device though otherwise too much hair would build up. The only other concern i have is this: what if your drain clogs and you need to pour some draino down it? Wouldn’t that corrode the coating making it useless?

shawnyar217 Says:

March 25th, 2009 at 12:28 pm

About Draino, this is from the FAQ on the EcoDrain website:

When my drain clogs, I use chemical and/or bacterial
cleaners to unclog it. Is it safe to use these with the
EcoDrain?

The EcoDrain is corrosion resistant and it is as safe to
use chemical and bacterial cleaners with the EcoDrain
as it is for the rest of the piping.

dgle88 Says:

March 26th, 2009 at 11:46 am

I like the idea, but how exactly are you supposed to control it?

It doesn’t directly decrease the water heater usage, it just heats cold water. Personally, I always turn the hot water all the way on and leave the cold water off (my water heater sucks). Wouldn’t that eliminate the usage of this thing?

Also, won’t a lot of people just turn UP the cold water to cool it down rather than turn DOWN the hot? Which would also defeat the purpose, correct?

BUSYGREENBEE Says:

March 30th, 2009 at 5:16 pm

There are also these on the market:
http://www.renewability.com/powerpipe.htm
http://www.gfxtechnology.com/VGFX.html

Oleks Says:

April 5th, 2009 at 1:46 am

Why on the scheme given below they did not connect water from EcoDrain to heater intake?!!

Oleks Says:

April 5th, 2009 at 2:15 am

Connecting EcoDrain’s outlet to heater inlet resolves dgle88’s and other problems.

bareotter Says:

April 6th, 2009 at 11:16 pm

I just stop up the drain and let the water cool warming the house in the winter before it goes down the drain. Summer that\’s another story.

Renewables At Home Says:

May 31st, 2009 at 8:29 am

Another great way to cut your water heating bill is by insulating your hot water heater. It’s cheap, you can do it yourself and it should cut costs by about 10 to 15 percent. I recently wrote a blog post on two ways to do this: http://www.renewablesathome.com/energy-conservation/save-energy-free-insulate-hot-water-heater

Please keep your comments relevant to this blog entry. Email addresses are never displayed, but they are required to confirm your comments.

Please note that gratuitous links to your site are viewed as spam and may result in removed comments.